Luxform, Your lighting specialist

12V 3x Thalos Complete set

Artikelnummer: 87365.119.00

If you can use a little more light in the driveway but don't have space to hang a lamp, the Luxform Thalos spot is ideal. The Thalos consists of three lamps that are easy to install thanks to the Easy-Connect system. The lamps are designed for high pressure. If you drive over it, the lamp will remain intact. This designer spot can be used in all garden styles but is best for elegant gardens. The Thalos Spot from Luxform has an integrated LED light, has a brightness of 26 lumens and emits a warm white color. This creates an atmosphere exactly where you want it. Since the Luxform lamp runs on 12 volts, the wire poses no threat to your child or pet. And do you know what makes this set so easy? Everything is in the box to get started: 3 lamps, transformer, 10 meter connection cable and 3 cable plugs! Note: You will need a 50mm drill bit for installation. 

Info 12V lighting:

Luxform 12 volt lights are suited for every possible use of light in your garden. The lights are totally safe for animals and playing children. The cables are quickly and easily connected with the unique “Easy Twist” system and can be used just underneath the surface without the need of gullies or additional tools.

1. Select the lights you want to use in your garden. Will you chose lanterns for extra atmosphere; spotlights to highlight special plants or features; built-in lights for in your decking, paving or perhaps something in or around the pond?

2. Count up the wattages of all lights chosen. Now you can decide on which transformer to use (available in 20W, 60W and 105W. By counting the wattages of the individual lights, you can determine the capacity of the transformer you require. You may need

to allow for extra lights at a later stage. Note: the capacity (wattage) of the transformer always needs to be greater than the total wattage of the lights in your system.

3. Measure the distance from the transformer to the furthest light to be installed. This length of cable is needed to install all the lights. The Luxform main cable has a transformer plug attached and has a length of 15 metre. A 10 metre extension cable can be added. 

= Easy Twist Connect After choosing your lights, the only thing there is left is to place and connect them. This is simple to do due to the Luxform Easy Twist and connect system. Place the main cable and the cable of the lamp inside the connector. Place the cap on and twist them together to make the connection. The connector is water-resistant

Info Stainless Steel products:

 Please remember that stainless steel is not a maintenance free product and that you need to clean the lights every 6 months to prevent discolouration.

Lees meer
Energy label G
26 lumen light output
Description

If you can use a little more light in the driveway but don't have space to hang a lamp, the Luxform Thalos spot is ideal. The Thalos consists of three lamps that are easy to install thanks to the Easy-Connect system. The lamps are designed for high pressure. If you drive over it, the lamp will remain intact. This designer spot can be used in all garden styles but is best for elegant gardens. The Thalos Spot from Luxform has an integrated LED light, has a brightness of 26 lumens and emits a warm white color. This creates an atmosphere exactly where you want it. Since the Luxform lamp runs on 12 volts, the wire poses no threat to your child or pet. And do you know what makes this set so easy? Everything is in the box to get started: 3 lamps, transformer, 10 meter connection cable and 3 cable plugs! Note: You will need a 50mm drill bit for installation. 

Info 12V lighting:

Luxform 12 volt lights are suited for every possible use of light in your garden. The lights are totally safe for animals and playing children. The cables are quickly and easily connected with the unique “Easy Twist” system and can be used just underneath the surface without the need of gullies or additional tools.

1. Select the lights you want to use in your garden. Will you chose lanterns for extra atmosphere; spotlights to highlight special plants or features; built-in lights for in your decking, paving or perhaps something in or around the pond?

2. Count up the wattages of all lights chosen. Now you can decide on which transformer to use (available in 20W, 60W and 105W. By counting the wattages of the individual lights, you can determine the capacity of the transformer you require. You may need

to allow for extra lights at a later stage. Note: the capacity (wattage) of the transformer always needs to be greater than the total wattage of the lights in your system.

3. Measure the distance from the transformer to the furthest light to be installed. This length of cable is needed to install all the lights. The Luxform main cable has a transformer plug attached and has a length of 15 metre. A 10 metre extension cable can be added. 

= Easy Twist Connect After choosing your lights, the only thing there is left is to place and connect them. This is simple to do due to the Luxform Easy Twist and connect system. Place the main cable and the cable of the lamp inside the connector. Place the cap on and twist them together to make the connection. The connector is water-resistant

Info Stainless Steel products:

 Please remember that stainless steel is not a maintenance free product and that you need to clean the lights every 6 months to prevent discolouration.

Interested in Low voltage lighting from Luxform?

Luxform 12 volt lights are suited for every possible use of light in your garden. The lights are totally safe for animals and playing children. The cables are quickly and easily connected with the unique “Easy Twist” system and can be used just underneath the surface without the need of gullies or additional tools.

Specifications

Product details

Itemnumber 87365.119.00
Barcode 0715467873653
Material Stainless Steel
Colour Stainless steel
Size 100x100x35
Light source LED
Number of bulbs 3
Lumen 26
Motion sensor No
On/off switch No
Kind of set Complete set
Wattage 1 1W
Nominal useful luminous flux 26
KLEURTEMPERATUUR 3000
Beamangle 120
Nominal life time 25000
Switching cycles 15.000
Warm-up-time up to 60% output 1 sec
Suitable for accent lighting No
Rated power 1
Rated useful luminous flux 26
Rated life time 25000
Warm-up-time 1
Rated useful luminous flux 26

Questions? Please contact us!

Your message has been send

Agree Don't agree