Would you like to illuminate the garden path or the driveway clearly at all times? Then the "Bundaberg" stainless steel garden light is an asset to the garden. The lamp is equipped with a grain coating, which makes it very suitable for both a classic and a modern environment. The supplied LED bulb has a light output of no less than 250 lumens. Of course, thanks to the warm white light, this lamp also offers a pleasant atmosphere on the terrace and / or veranda. All you need to connect this 12V lamp is a transformer and a main cable.

Info 12V lighting:

Luxform 12 volt lights are suited for every possible use of light in your garden. The lights are totally safe for animals and playing children. The cables are quickly and easily connected with the unique “Easy Twist” system and can be used just underneath the surface without the need of gullies or additional tools.

1. Select the lights you want to use in your garden. Will you chose lanterns for extra atmosphere; spotlights to highlight special plants or features; built-in lights for in your decking, paving or perhaps something in or around the pond?

2. Count up the wattages of all lights chosen. Now you can decide on which transformer to use (available in 20W, 60W and 105W. By counting the wattages of the individual lights, you can determine the capacity of the transformer you require. You may need to allow for extra lights at a later stage. Note: the capacity (wattage) of the transformer always needs to be greater than the total wattage of the lights in your system.

3. Measure the distance from the transformer to the furthest light to be installed. This length of cable is needed to install all the lights. The Luxform main cable has a transformer plug attached and has a length of 15 metre. A 10 metre extension cable can be added. 

= Easy Twist Connect After choosing your lights, the only thing there is left is to place and connect them. This is simple to do due to the Luxform Easy Twist and connect system. Place the main cable and the cable of the lamp inside the connector. Place the cap on and twist them together to make the connection. The connector is water-resistant